Hits since 2023-11-25 00:14:49:
138
|
|
|
1/2A Size:
A 1/2 A sized project using a geared astro .010
.049 to electric conversion
Cox Black Widow produces 60 Watts (0.08 bhp) and Tee Dee produces 78
Watts (.105 bhp) both on 25% Nitro
Chargers:
Build your own NiMH trickle charger
Are one of these suitable for the trickle charger in the
previous link?
Jerry explains well how to make a constant current charger using a
LM317. See two links back.
200 Transistor Circuits, a Free Book--has a 12V trickle
charger circuit
Using a LM317 as a current regulator
A hack for the Eco Six uses hidden USB interface
Electronics:
DIY LVC for LiPoly
do it yourself electronics
Farnell--source for meters
ESCs:
Explains that the ESC BEC is made to maintain needed voltage
for receiver
Build your own brushed motor ESC
Has info and manual for Advance-18-Pro and mentions an advanced
programming card
Fuses:
Pico 265, 266, 267 Data sheets
Pico 275, 276 Data sheets
Pico 473 Data sheets
Gear Boxes:
Gear boxes
Information:
electic power FAQs
Electric Flight Wiring by Stefanv.com
Use 5 Watt-hours per pound
Power equation and some mistakes
Article tells about higher torque of outrunners and number
of watts needed per pound
Motors:
Speed 400 7.2V motor is .38
Speed 400 motor--perhaps good for 150% Q Tee
Break-in a motor
Another way to break-in motor
Break-in with motor cleaner
touches on motor to gearbox and pinion installations
Flight Calculators
Himax motors
Planes:
Easy Star RTF with 3 Channel Radio, Servos, Speed Control,
Motor, Battery and charger
Easy Star price and details
The X-08 speed control that comes with the Easy Star
Speed 400 motor--is this like what comes with Easy Star?
Robin Park Flyer
Other Robin plans--good for details
Swallow is like Robin
Speed 280 motor--perhaps good for Robin
4:1 gearbox for Robin's 280 and 3 blade?
4:1 gearbox for Robin (again)
Speed control for Robin
use 1100 for 720: 7.2V for Robin?
hobby lobby 720 mah for Robin
Sanyo 720 mah gives weight
Co-Co Li Poly is a little better in voltage, cost, and
capacity, but nearly half the weight compared to 720 Ni-MH
Use Ultracoat Lite for Robin
I saw the Miss Stick at the SEFSD field
Simplicity, a flat foam board flying wing
Props:
Prop shaft adapters
Hobby Lobby Slow Flyer props
Discussion of APC propeller speed limits
Terminals:
Solder Lugs: Hopefully these will work for my Shurite Amp-Meters
Wheels:
Maxxprod has light foam wheels for 1/16 inch axels
Wire:
Silicone test lead wire
|
|
|
